Ross Synergy 100 MD, Operator'S Manual

Page: 244 / 402

13–6 • Position/Crop Functions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Pivot Position
Choose the Pivot Position option to move the pivot point to a different location in 3D space.
Use the following procedure to manually set the Pivot Point:
1. Navigate to the Position/Crop Menu as follows:
• Press
FLY KEY
in the Effects Keyers Group .
• Press
MENU
to display the Main Menu .
• Press
8. S&T MD
to display the S&T MD Menu .
• Press
0. Position/Crop
to display the Position/Crop Menu .
2. Press
3. Pivot Position
to display the Pivot Position Menu .
Position/Crop — Pivot Position Menu
3. Select a specific Pivot Point as follows:
• X-Axis — Use the HUE knob, or move the Positioner left and right , to move the
pivot position along the X-Axis .
• Y-Axis — Use the
SAT
knob, or move the Positioner up and down , to move the
pivot position along the Y-Axis .
• Z-Axis — Use the
LUM
knob, or twist the Positioner knob clockwise and
counter-clockwise , to move the pivot position along Z-Axis .
This completes the procedure for manually setting the Pivot Point.
Operating
Tip
You can use the
POSN
hotkey to display the Position/Crop Menu
directly.
Use positioner or Hue, Sat, Lum to modify
Position/Crop 1 2 U O1 O2 Key 1
0. Position
1. Rotation
2. Pivot Preset
3. Pivot Position
4. Aspect
Off
5. Crop Horizontal
6. Crop Vertical
7. Transp.
8. Freeze
9. Adv. Positioning
Pivot Position X: 0.0
Y: 0.0
Z: 0.0
Off
Off