Ross Synergy 100 MD, Operator'S Manual

Page: 76 / 402

4–14 • Switcher Basics Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
2. Press the
FADE TO BLACK
button in the Transition Control Group .
The
FADE TO BLACK
button will illuminate as the transition is being performed
The
FADE TO BLACK
button will flash Red when the fade to black transition has
been completed.
3. Press the
FADE TO BLACK
button again to fade from black to the normal program
output.
This completes the procedure for performing a Fade to Black operation.
Note If you want to cancel, or reverse, the Fade to Black, press the FADE
TO BLACK button again and the fade will reverse.
Operating
Tip
When the switcher is in Fade to Black, you can perform any other
effects or transitions in order to prepare your shot for when you
perform a Reverse Fade to Black and return to the normal program
output.