Ross Synergy 100 MD, Operator'S Manual

Page: 296 / 402

17–20 • Squeeze & Tease MD Sequences and Wipes Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Working with Sequences
This section discusses how to load, rename, and delete sequences. Additional operational notes are
also included.
Loading a Sequence
Use the following procedure to load any of the available sequences:
1. Navigate to the Sequence Menu as follows:
• Press
FLY KEY
in the Effects Keyers Group to display the S&T MD Menu .
• Press
2. Sequences
to display the Sequence Menu .
Sequence Menu
2. Load the sequence as follows:
• Press
0. Load/Save Sequence
to display the Load/Save Seq. Menu .
Load/Save Seq. Menu
• Use the knobs to select the sequence from the list.
• Press
0. Load Sequence
to load the sequence and display the Sequence Menu .
The sequence appears in the workspace.
This completes the procedure to load any of the available sequences from memory.
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Sequence Key 1
0. Load/Save Sequence
1. Previous Keyframe
2. Next Keyframe
3. Insert Keyframe
4. Overwrite Keyframe 5. Delete Keyframe
6. Delete Workspace
7. Wipe Modifier
8. Modify Keyframes
9. Keyframe Parameters
Use positioner or Hue, Sat, Lum to modify
Load/Save Seq. Key 1
0. Load Sequence
1. Save Sequence
2. Delete Sequence
3. Rename Sequence
SEQ : New Seq (00)
Keyframes: 2
Channels: 0
Duration: 00:01:00
None
New Seq (00)
New Seq (01)
Unused (02)
Unused (03)
Unused (04)
Seq.: