Panasonic KX-TD1232E, Installation Manual

Page: 530 / 713

4.11 Option Programming
COS Additional Information
991
4-176 System Programming
Description
Allows the following programming item to be changed, if required.
Bits 4, 3, 2, 1: Sets the number of digits allowed to dial out during
an analogue outside call on a Class of Service (COS) basis. If an
outside party hangs up and the extension user tries to dial out still
on the CO line, the system will disconnects the line at the time the
assigned number of digits are dialled.
This program can be added if CPC Signal Detection is not provided
by the CO.
Bit 5: Enables or disables the Call Forwarding – Follow Me feature
on a COS basis.
Other bits: Reserved.
Selection
• COS number: 1 through 8, ( =all COS)
• Selection for bits 4, 3, 2, 1:
0000: no limit / 0001: 1 digit / 0010: 2 digits / 0011: 3 digits /
0100: 4 digits / 0101: 5 digits / 0110: 6 digits / 0111: 7 digits /
1000: 8 digits / 1001: 9 digits / 1010: 10 digits / 1011: 11 digits /
1100: 12 digits / 1101: 13 digits / 1110: 14 digits / 1111: 15 digits
• Selection for bit 5: 0 : disable / 1 : enable
Default
Bits 4, 3, 2, 1: All COS – 0000 / Bit 5: All COS – 1
Programming
1. Enter 991.
Display: COS Add Inf.
2. Press NEXT.
Display: COS NO?
→
3. Enter a COS number.
Display example: 1111111111110000
4. Keep pressing or to move the cursor to the desired
bit.
Display Example
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0
Bit Number