Panasonic KX-TD1232E, Installation Manual

Page: 480 / 713

4.8 Extension Programming
ISDN Class of Service
613
4-138 System Programming
Description
Programs each ISDN port for a Class of Service (COS). The COS
determines the call handling abilities of each port.
A primary and a secondary COS numbers can be assigned per port.
Selection
• Port number: KX-TD816 – 01 through 04, ( =all ports)
KX-TD1232 – 03 through 06, 09 through 12,
(
=all ports)
• COS number: 1 through 8
Default
All ports – COS 1, COS 1
Programming
1. Enter 613.
Display: ISDN COS Assign
2. Press NEXT.
Display: Port NO?
→
3. Enter a port number.
To enter a first number, you can also press NEXT.
Display example: #03:COS1,COS1
4. Enter a COS number for primary number.
To change the current entry, enter the new number.
5. Press .
6. Enter a COS number for secondary number.
To change the current entry, enter the new number.
7. Press STORE.
8. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
9. Repeat steps 4 through 8.
10. Press END.
Conditions
• There is a maximum of eight Classes of Services. Every ISDN
extension must be assigned to a Class of Service and is subject to the
COS Programming of programs [5XX] and [991]. The restriction of
program [991], Bit 1 through 4, applies only for analogue outside
lines.
• Port numbers 03 through 06 are for the Master System and 09 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the key in step 3. In this
case, the display shows the contents programmed for a first port.
Feature References
Section 3, Features,
Class of Service (COS)
Integrated Services Digital Network (ISDN) Extension