Panasonic KX-TD1232E, Installation Manual

Page: 597 / 713

8.3 DECT Portable Station Features
DECT Portable Station Section 8-39
• The following list shows the conditions when using a certain feature
while in SXDP mode.
Programming References
Section 4, System Programming
[100] Flexible Numbering, Super extra device port (SXDP)
Section 8.4, System Programming
[654] SXDP Assignment
Feature References
None
Operation References
DECT Portable Station – Operation
—User Manual
Using Your PS in Parallel with the Wired Telephone
(Super EXtra Device Port [SXDP])
F
EATURE
C
ONDITION
• The memory of Call Log is used together. The call logged by
the wired telephone can be used by the PS and vice versa.
• The call charge of the PS is included with the wired tele-
phone. If the pre-assigned limit is reached, both telephones
cannot make further calls without authorisation.
• Calls to the wired telephone due to the setting of the wired
telephone.
• The Call Forwarding – All feature for the wired telephone
can be set from a PS so that all incoming calls to the wired
telephone will be forwarded to the desired destination.
• The COS level of the wired telephone becomes available.
• Calls to the wired telephone due to the setting of the wired
telephone.
• The PS can make a call even if the wired telephone is locked.
• The memory of the Pickup Dialling exists individually.
• The memory of the Saved Number Redial of the wired tele-
phone cannot be used by the PS.
• The memory of the Station Speed Dialling (PS Dialling
Directory) exists individually.
Call Log, Outgoing
Budget Management
Call Forwarding
Class of Service (COS)
Do Not Disturb (DND)
Electronic Station Lockout
Pickup Dialling
Redial, Saved Number
Station Speed Dialling
(PS Dialling Directory)