Panasonic KX-TD1232E, Installation Manual

Page: 584 / 713

8.2.5 Site Survey
8-26 DECT Portable Station Section
8.2.5 Site Survey
3. To record the result;
3-1. Press (Talk).
• Attention!!
All directory data will be cleared.
To return to the test result display,
press
(Clear).
3-2. Press (Talk).
• To clear all log data, press
(Flash).
3-3. Enter the log number
(0 through 9).
3-4. Press (Talk).
• The result is recorded.
Note • The results of measurement for the 24 slots on the channel are saved
each time a channel is set. If the same channel is set, the new results
override the previous ones. Therefore, a measurement of 10 channels
x
24 slots in total can be made.
• If correct results cannot be obtained (e.g., there are many error coun-
ters), change the allocation of the Cell Station and repeat the site sur-
vey to select the best location.
• When a slot is synchronised in step 2 (“SYNC” is displayed), the other
slots in the same channel show “OTHER”.
• Please do not use several PSs for the test simultaneously. This may
cause interference problems, so that the test may not be executed prop-
erly.
CLR
ALL BOOK DATA
IS CLEARED!!
ARE YOU SURE?
TALK=YES,TRANS=NO
LOG NO.?(0-9)
FLASH=ALL CLR
LOG NO.?(0-9) 0
FLASH=ALL CLR
LOG NO.?(0-9) 0
STORED
Example
Example