Panasonic KX-TD1232E, Installation Manual

Page: 357 / 713

System Programming 4-47
4.3 System Programming
Expansion Card / Unit Type
109
Description
Assigns the type of expansion cards/units to be used in the Master
and Slave Systems. This allows the system to identify the card
and/or unit in each expansion location.
Selection
KX-TD816
• Areas 1; 2; 3 = 1 (Inside the system): C (4CO) / S (2S0)
2; 3 (Expansion Area): C (4CO) / S (2S0) /
S2 (6S0) / S3 (1 PRI) / E (EXT)
KX-TD1232
• Master / Slave
• Areas 1; 2; 3; 4 = 1 (Inside the system): C (8CO) / S (4S0)
2; 3; 4 (Expansion Area): C (4CO) / S (2S0) /
S2 (6S0) / S3 (1 PRI) / E1 (EXT1) / E2 (EXT2)
Default
KX-TD816: C; C; E
KX-TD1232: Master and Slave – C; C; E1; E2
Programming
KX-TD816
1.
Enter 109.
Display: Expansion Card
2. Press NEXT.
Display example: Mast.:C;C;E
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press .
5. Keep pressing SELECT until the desired selection is
displayed.
6. Repeat steps 4 and 5 until all the required entries are
completed.
7. Press STORE.
8. Press END.
KX-TD1232
1.
Enter 109.
Display: Expansion Card
2. Press NEXT to program Master System.
To program “Slave,” press NEXT again.
Display example: Mast.:C;C;E1;E2