Panasonic KX-TD1232E, Installation Manual

Page: 322 / 713

4.2 Manager Programming
Flexible CO Button Assignment
(contd.)
005
4-24.0 System Programming
Default
• KX-TD816
All jacks – CO buttons 1 through 8 = Single-CO 01 through 08;
Ring tone type 2
• KX-TD1232
All jacks – CO buttons 1 through 24 = Single-CO 01 through 24;
Ring tone type 2
Programming
1. Enter 005.
Display: Flexible Key Asn
2. Press NEXT.
Display: Jack NO?
→
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display: PT–PGM Mode
4. Press a CO button to be changed.
The display shows the contents pre-assigned to the button.
Display example: CO-01
5. Enter a button code (plus parameter, if required).
To change the parameter, press CLEAR and the new parameter.
6. Press STORE.
7. • To program another CO button of the same jack, repeat steps
4 through 6.
• To program another jack, press SELECT and repeat steps 3
through 6.
8. Press END.
Cancelling
1. Perform the same procedures as steps 1 through 4 above.
2. Enter 2.
3. Press STORE.
4. Press END.
Button Code
9 (Terminate)
(Loop-CO)
# (Group-CO)
CO (ringer frequency)
Parameter
None
None
1 through 8 (CO line group number)
1 through 8 (Ring tone type number)