Panasonic KX-TD1232E, Installation Manual

Page: 434 / 713

4.6 CO Line Programming
CO Line Name Assignment
421
4-106 System Programming
Description
Assigns the company or customer names to each CO line so that the
operator or extension user can find the destination where the caller
is trying to reach before answering.
Selection
• CO line number:
KX-TD816 – 01 through 8, ( =all CO lines)
KX-TD1232 – 01 through 24, ( =all CO lines)
• Name: 10 characters (max.)
Default
All CO lines – Not stored
Programming
1. Enter 421.
Display: CO Line Name
2. Press NEXT.
Display: CO Line NO?
→
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01:Not Stored
4. Enter a name.
For entering characters, see Section 4.1.3 “Entering Characters.”
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• In the case of KX-TD1232, CO01 through CO12 are for the Master
System and CO13 through CO24 are for the Slave, if available.
• There is a maximum of 24 names. Each name has a maximum of 10
characters.
• To assign all CO lines to one selection, press the key in step 3. In
this case, the display shows the contents programmed for CO01.
Feature References
Section 3, Features,
CO Incoming Call Information Display