Panasonic KX-TD1232E, Installation Manual

Page: 486 / 713

4.8 Extension Programming
CLIP / COLP Number Assignment for Extension
623
4-142.2 System Programming
Description
Assigns a CLIP/COLP number for each extension.
Selection
• Jack number: KX-TD816 – 01 through 16, (-1 / -2)
KX-TD1232 – 01 through 64, (-1 / -2)
( =all jacks, -1 = first part, -2 = second part)
• CLIP/COLP number: 16 digits (max.)
Default
All jacks – Not Stored
Programming
1. Enter 623.
Display: CLIP/COLP NO.
2. Press NEXT.
Display: Jack NO?
→
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering the jack
number.
Display example: #01-1:Not Stored
4. Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• Each CLIP/COLP number consists of 0 through 9.
• For the KX-TD1232, jack numbers 01 through 32 are for the Master
System and 33 through 64 are for the Slave, if available.
• To assign all jacks to one selection, press the key in step 3. In this
case, the display shows the contents programmed for jack 01.
Feature References
Section 3, Features,
Calling/Connected Line Identification Presentation (CLIP/COLP)