Panasonic KX-TD1232E, Installation Manual

Page: 485 / 713

4.8 Extension Programming
Incoming Call Display
622
System Programming 4-142.1
Description
Allows you to choose between three display types when an
incoming call is received.
“Caller” means the incoming caller’s telephone number and name
are displayed. “CO Line” means the CO line number and CO line
name assigned in the program [421] are displayed. “DDI” means
the called party’s DDI number and extension name are displayed.
Selection • Jack number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
(
=all jacks)
• Display Types: Caller / CO Line / DDI
Default
All jacks – Caller
Programming
1. Enter 622.
Display: Incoming Display
2. Press NEXT.
Display: Jack NO?
→
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display example: #01:Caller
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• For the KX-TD1232, jack numbers 01 through 32 are for the Master
System and 33 through 64 are for the Slave, if available.
• To assign all jacks to one selection, press the key in step 3. In this
case, the display shows the contents programmed for jack 01.
Feature References
Section 3, Features,
CO Incoming Call Information Display
Display, Call Information