Panasonic KX-TD1232E Installation Manual Download Page 183

Page: 183 / 713

Features

Features

3-81

andset / Headset Selection

Description

The system supports the use of headsets on proprietary telephones.

Conditions

• The headset is an user-supplied item.
• To set headset mode on a digital proprietary telephone (PT), use station

programming. To set headset mode on an analogue PT, use the handset
/ headset selector provided on the set and / or on the headset.

Programming References

Station Programming.......................................................User Manual,
Initial Settings – Handset/Headset Selection

Feature References

None

Operation References

None

andset Microphone Mute

Description

Allows the KX-T7400 series digital proprietary telephone user to
turn off the handset microphone, for privacy.

Conditions

• This is effective for the handset microphone only. Only your voice will

be muted during a handset conversation.

• The user can hear the other party’s voice during Handset Microphone

Mute.

Programming References

No programming required.

Feature References

None

Operation References

Operation – During a Conversation

—User Manual

Mute

Summary of Contents for KX-TD1232E










































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232E

Reviews:

Related manuals for KX-TD1232E

Brands by name

Popular brands

Panasonic KX-TD1232E, Installation Manual

Search results

Summary of Contents for KX-TD1232E

Reviews:

Related manuals for KX-TD1232E

Brands by name

Popular brands