Panasonic KX-TD1232E, Installation Manual

Page: 667 / 713

35
System Programming
CO-to-TIE Transfer
452
Description
Enables or disables transferring an incoming outside call to the TIE
line on a CO line group basis. This restriction applies to the
following: 1) Call Forwarding to a TIE line 2) Call Transfer to a
TIE line.
Selection
• CO line group (TRG) number: 1 through 8,
( =all CO line groups)
• Enable / Disable
Default
All CO line groups – Disable
Programming
1. Enter 452.
Display : CO-TIE Transfer
2. Press NEXT.
Display: TRK GRP NO?
→
3. Enter a CO line group number.
To enter CO line group number 1, you can also press NEXT.
Display example: TRG1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another CO line group, press NEXT or PREV, or
SELECT and the desired CO line group number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
None