Panasonic KX-TD1232E, Installation Manual

Page: 662 / 713

30
System Programming
TIE Incoming Assignment
431
Description
Assigns a TIE incoming method, immediate or wink, to each TIE
table depending on your central office service.
Immediate: Incoming and TIE calls can be received right after the
receiving signal arrives.
Wink: Incoming and TIE calls can be received after the wink signal
is transmitted to the central office (after the receiving signal
arrives).
Selection
• TIE table number: 1 to 4, ( =all TIE tables)
• Immediate / Wink
Default
All TIE tables – Wink
Programming
1. Enter 431.
Display: Signal In
2. Press NEXT.
Display: Table NO?
→
3. Enter a TIE table number.
To enter TIE table number 1, you can also press NEXT.
Display example: 1:Wink
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another TIE table, press NEXT or PREV, or
SELECT and the desired TIE table number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
To assign all TIE tables to one selection, press the key in step 3. In
this case, the display shows the contents programmed for TIE table
number 1.