Panasonic KX-TD1232E, Installation Manual

Page: 445 / 713

4.6 CO Line Programming
TD286 ISDN Port Type
440
System Programming 4-113.4
Description
Assigns the type of each port either CO line or extension line on a
TD286 ISDN port basis.
Selection
• Port number: KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
(
=all ports)
• CO (CO line) / Extension
Default
All ports – Extension
Programming
1. Enter 440.
Display: TD286 Line Type
2. Press NEXT.
Display: Port NO?
→
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Extension
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• For the KX-TD816, port numbers 05 and 06 are fixed as “Extension.”
• For the KX-TD1232, port number 01 through 06 are for the Master
System and 07 through12 are for the Slave, if available.
• To assign all ports to the same selection, press the key in step 3. In
this case, the display shows the contents programmed for the first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Feature References
Section 3, Features,
Integrated Services Digital Network (ISDN) Extension