Panasonic KX-TD1232E, Installation Manual

Page: 447 / 713

4.6 CO Line Programming
TD286 ISDN Configuration
442
System Programming 4-113.6
Description
Assigns the configuration on a TD286 ISDN port basis.
Selection
• Port number: KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
(
=all ports)
• Point (point to point) / Multipoint (point to multipoint)
Default
All ports – Multipoint
Programming
1. Enter 442.
Display: TD286 Accs. Mode
2. Press NEXT.
Display: Port NO?
→
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:Multipoint
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• For KX-TD1232, port number 01 through 06 are for the Master System
and 07 through12 are for the Slave, if available.
• If one equipment is connected to the ISDN port, select “Point.” If
multiple equipment are connected, select “Multipoint.”
• To assign all ports to the same selection, press the key in step 3. In
this case, the display shows the contents programmed for the first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Feature References
Section 3, Features,
Integrated Services Digital Network (ISDN) Extension