Panasonic KX-TD1232E, Installation Manual

Page: 487 / 713

4.8 Extension Programming
CLIP / COLP Number Assignment for ISDN Extension
624
System Programming 4-142.3
Description
Assigns a CLIP/COLP number for each ISDN extension port.
Selection
• Port number: KX-TD816 – 01 through 04,
KX-TD1232 – 03 through 06, 09 through 12,
(
=all ports)
• CLIP/COLP number: 16 digits (max.)
Default
All ports – Not Stored
Programming
1. Enter 624.
Display: ISDN CLIP/COLP
2. Press NEXT.
Display: Port NO?
→
3. Enter a port number.
To enter port number 01 or 03, you can also press NEXT.
Display example: #03:Not Stored
4. Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• Each CLIP/COLP number consists of 0 through 9.
• For the KX-TD1232, port numbers 03 through 06 are for the Master
System and 09 through 12 are for the Slave, if available.
• To assign all jacks to one selection, press the key in step 3. In this
case, the display shows the contents programmed for the first port.
Feature References
Section 3, Features,
Calling/Connected Line Identification Presentation (CLIP/COLP)