Panasonic KX-TD1232E, Installation Manual

Page: 555 / 713

7.3 PRI System Programming
PRI Configuration
PRI Section 7-7
450
Description
Assigns the number of B channels which are actually used out of
the 8 PRI line channels (for KX-TD816) or 30 PRI line channels
(for KX-TD1232) and the installation location of the CO line card
(KX-TD181 or KX-TD182) or BRI card (KX-TD281 or KX-
TD282), the CO line unit (KX-TD180), or BRI unit (KX-TD280 or
KX-TD286). The CRC4 mode can be also assigned.
Selection
KX-TD816
• B channel number and installation spot: 8 Y– – –/0 YY – –
(Y=the card can be installed, – =this area is not changeable)
ex.: 8 Y – – –
Programming example:
1. To install TD290 and TD282: 8 Y– – –
KX-TD1232
• B channel number and installation spot: 30 Y–NN/30 N–YN/
30 N–NY/26 Y–NY/
26 N–YY/ 22 Y–YN/
18 Y–YY/0 YYYY
(Y=the card can be installed, – =this area is not changeable,
N=the card is not installed.)
ex.: 30 Y – N N
Programming example:
1. To install TD290 and TD281 to the Master system: 30 Y–NN
2. To install TD290 to the Master and TD280 to the Slave systems:
30 N–NY
• CRC4: Disable / Enable
Default KX-TD816: 0 YY – – / CRC4: Enable
KX-TD1232: 0 YYYY / CRC4: Enable
the number of available B channels
Status of the basic area of the master system.
Status of the expansion area of the master system.
Status of the basic area of the slave system.
Status of the expansion area of the slave system.
the number of available B channels
Status of the basic area of the system.
Status of the expansion area of the system.
Not available.