Panasonic KX-TD1232E, Installation Manual

Page: 623 / 713

8.4 DECT PS System Programming
PS CLIP / COLP Number Assignment
673
DECT Portable Station Section 8-65
Description
Assigns a CLIP/COLP number for each PS.
Selection
• PS registration number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
• CLIP/COLP number: 16 digits (max.)
Default
All PSs – Not Stored
Programming
1. Enter 673.
Display: PS CLIP/COLP
2. Press NEXT.
Display: PS NO?
→
3. Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:Not Stored
4. Enter a CLIP/COLP number.
To change the current entry, press CLEAR and enter the new number.
5. Press STORE.
6. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
7. Repeat steps 3 through 6.
8. Press END.
Conditions
• Each CLIP/COLP number consists of 0 through 9.
• To assign all PSs to one selection, press the
key in step 3. In this
case, the display shows the contents programmed for PS 01.
Feature References
Section 3, Features,
Calling / Connected Line Identification Presentation (CLIP / COLP)