Panasonic KX-TD1232E, Installation Manual

Page: 709 / 713

4
Site Surveying
Preparing for the Site Survey
•
Program PBX.
•
Assign the CS ID to the PS (CS ID is only available from the PC Programming Tool).
•
Disconnect TD142 from PBX.
•
Change DIP switches to Test Mode ( at the rear of the TD142 ).
•
Connect TD142 to Power Supply.
Assigning a PS ( TD7500 ) to a Cell Station
To enter Survey Mode : Switch PS On while pressing, ‘TALK’ + ‘FLASH (
.
)’ + ‘
*
’
Step Display : Entry
FUNCTION < 0 – 4 >
[ 2 ] CS NO? ( 1 – 8 )
Number is not CS System number.
It is eight locations for entering CS ID numbers for Site Survey
1 ~ 8 Enter a spare location number, The TD7500 can store 8 CS ID’s for Site Surveying .
The CS ID number is not related to the CS number on the PBX
[ TALK ] CS ID1 =
[ CS ID ] CS ID1 = 0123456789
A ~ F are the 6 Function Keys below the Number Pad
[ TALK ] To Save
If more than one Cell Station is to be surveyed repeat this step for the other CS ID’s
[ CLR ] Returns to Main Menu
To clear CS ID numbers ( can be overwritten )
To enter Survey Mode : Switch PS On while pressing, ‘TALK’ + ‘FLASH (
.
)’ + ‘
*
’
Step Display : Entry
FUNCTION < 0 – 4 >
[ 3 ] CS – ID CLEAR, CS NO? ( 1 – 8 )
Enter CS Number to be cleared.
[ TALK ] CS ID Cleared
Repeat for other CS Numbers