Panasonic KX-TD1232E, Installation Manual

Page: 432 / 713

4.6 CO Line Programming
Subscriber Number Assignment
419
4-104 System Programming
Description
Assign the subscriber number which is assigned to a CO line by a
central office for Calling Line Identification Presentation or
Connected Line Identification Presentation.
Selection
• CO line number:
KX-TD816 – 01 through 16, ( =all CO lines)
KX-TD1232 – 01 through 54, ( =all CO lines)
• Telephone number: 16 digits (max.)
Default
All CO lines – Not stored
Programming
1. Enter 419.
Display: Telephone Number
2. Press NEXT.
Display: CO Line NO?–>
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01: Not Stored
4. Enter a telephone number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5. Press STORE.
6. To program another CO line number, press NEXT or PREV,
or SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• The valid characters are 0 through 9.
• To assign all CO lines to one selection, press the
key at step 3. In
this case, the display shows the contents programmed for CO01.
• In case of the KX-TD1232, CO 01 through CO 12 are for the Master
System and CO 13 through CO 24 are for the Slave, If available.
• CO09 through CO16 of KX-TD816 and CO025 through CO54 of KX-
TD 1232 become available when the expansion unit KX-TD290 is
installed in the main unit.
• To display parts of the number which have scrolled off the display,
press or .
Feature References
Section 3, Features,
Calling Line Identification Restriction (CLIR)
Connected Line Identification Restriction (COLR)