Panasonic KX-TD1232E, Installation Manual

Page: 488 / 713

4.8 Extension Programming
TD286 Class of Service
627
4-142.4 System Programming
Description
Programs each TD286 ISDN port for Class of Service (COS). The
COS determines the call handling abilities of each port.
A primary and a secondary COS numbers can be assigned per port.
Selection
• Port number: KX-TD816 – 01 through 06,
KX-TD1232 – 01 through 12,
(
=all ports)
• COS number: 1 through 8
Default
All ports – COS1, COS1
Programming
1. Enter 627.
Display: TD286 COS Assign
2. Press NEXT.
Display: Port NO?
→
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #01:COS1, COS1
4. Enter a COS number for primary number.
To change the current entry, enter the new number.
5. Press .
6. Enter a COS number for secondary number.
To change the current entry, enter the new number.
7. Press STORE.
8. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
9. Repeat steps 4 through 8.
10. Press END.
Conditions
• There is a maximum of eight Classes of Services. Every ISDN extension
must be assigned to a Class of Service and is subject to the COS
Programming of programs [5XX] and [991]. The restriction of program
[991] – bits 1 through 4, applies only for analog outside lines.
• For KX-TD1232 port number 01 through 06 are for the Master System
and 07 through12 are for the Slave, if available.
• To assign all ports to the same selection press the key in step 3. In
this case, the display shows the contents programmed for the first port.
Feature References
Section 3, Features,
Class of Service
Integrated Services Digital Network (ISDN) Extension