Panasonic KX-TD1232E, Installation Manual

Page: 306 / 713

4-10 System Programming
4.1.3 Entering Characters
Please see the following example which shows how to select a
desired character.
For example, to select the letter “M”:
Select either of the following three methods:
(1) Using the SHIFT and Soft buttons
(for KX-T7230 / KX-T7235 / KX-T7433 / KX-T7436 only)
* See Combination Table 1.
1. Press 6. (“M” belongs to “6.”)
• The Function Line shows: M N O
2. Press the Soft 1 (M) button.
(Press SHIFT to display the lower case of the above letters.)
(2) Using the SELECT button
* See Combination Table 1.
1. Press 6. (“M” belongs to “6.”)
2. Press the SELECT button once.
• Pressing the SELECT button an appropriate number of
times gives you the desired letter. Pressing SELECT
twice gives the letter “m., pressing three times gives “N,”
and so on.
(3) Using the Jog Dial
(for KX-T7431 / KX-T7433 / KX-T7436 only)
* See Combination Table 2.
1. Press 6. (“M” belongs to “6.”)
2. Rotate the Jog Dial one pulse.
• Rotating the Jog Dial an appropriate number of pulses
gives you the desired letter. Rotating the Jog Dial two
pulses gives the letter “m,” rotating three pulses gives
“N,” and so on.
OR
1. Press any dialing keypad.
2. Rotate the Jog Dial until the desired character appears.
• If you keep rotating the Jog Dial, all of the characters will
be displayed. For example, If you rotate the Jog Dial after
pressing 2, characters will appear in the following order:
A a B b ···· Z z (space) ! ? . , ’ : ; * / + – = < >
# $ % & @ ( ) A a B b ····