Panasonic KX-TD1232E, Installation Manual

Page: 353 / 713

System Programming 4-43
4.3 System Programming
Account Codes
105
Description
Assigns the account codes for Account Code Entry, Verified – All
Calls and Verified – Toll Restriction Override modes. If Verified –
All Calls is assigned in program [508] “Account Code Entry
Mode,” an account code is required to make an outside call. If
Verified – Toll Restriction Override is assigned, an account code is
only required for a toll call and overrides toll restriction.
Selection • Location number: 001 through 128
• Account code: 10 digits (max.)
Default
All locations – Not stored
Programming
1. Enter 105.
Display: Account Code
2. Press NEXT.
Display: Location NO?
→
3. Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4. Enter an account code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new account code.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• There is a maximum of 128 verifiable account codes. Each code has a
maximum of 10 digits, consisting of 0 through 9.
• Program [508] “Account Code Entry Mode” is used to select the
Account Code Entry mode.
• Account codes having “99” in any part or ending with “9” are invalid,
as “99” is used as a delimiter when entering an account code.
• The account code recorded in location 001 is not printed out on the
SMDR (Private Call feature).
Feature References
Section 3, Features,
Account Code Entry
Private Call
Toll Restriction Override by Account Code Entry