Panasonic KX-TD1232E, Installation Manual

Page: 453 / 713

4.7 COS Programming
Extension-to-CO Line Call Duration Limit
502
System Programming 4-115
Description
This program allows you to restrict the duration of outside calls on
a Class of Service (COS) basis.
Selection
• COS number: 1 through 8, ( =all COS)
• Disable (no limit) / Enable (limit)
Default
All COS – Disable
Programming
1. Enter 502.
Display: CO Durat. Limit
2. Press NEXT.
Display: COS NO?–>
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• An outside call originated or answered by the programmed extension
user is disconnected when the time specified in program [205]
“Extension-to-CO Line Call Duration Time” expires.
• Extensions in the limited classes cannot establish a CO-to-CO call, that
is, cannot transfer / forward an outside call to another CO line.
• To assign all COS to one selection, press the key at step 3. In this
case, the display shows the contents programmed for COS 1.
• Program [601] “Class of Service” is used to assign a Class of Service to
each extension.
• Program [990] “System Additional Information, Area 02– Bit 02” is
used to program Limited Call Duration to be done for outgoing calls
only.
Feature References
Section 3, Features,
Call Forwarding – to CO Line
Limited Call Duration
Call Transfer, Screened – to CO Line