Panasonic KX-TD1232E, Installation Manual

Page: 642 / 713

10
In addition to the methods above, the system can use the TIE line
for sending CO line access code “9” through the other PBX. When
you dial the CO line access code and the CO line is busy, the
system automatically sends CO line access code “9” to a TIE line
so that you can access the CO line through the other PBX. This is
enabled by program [990] “System Additional Information, Area
08 (Bit 03)”.
5. TIE Line Routing Flow Chart
SLT
Enable
Enable
Enable
Disable
Disable
Extension no.
TIE line access code + (PBX code) + Extension no.
TIE line access code + PBX code (+ Account code) +
Phone no.
Select CO line group + (PBX code) + Extension no.
Select CO line group + PBX code (+ Account code) +
Phone no.
Your telephone Dial Modification Dialling Method
Features
A TIE call is made as follows.
PBX Code Method – 7-abc-xxxx
Extension No. Method – dexx
Not treated as a TIE
call. Is the dialled number identified with the stored
numbers? (Checks in program [100])
Are the accessed digits (abc or de) found in a TIE
Line Routing Table? (Checks in program [340])
Modifies the dialled number if a removed or added
number is assigned. (Checks in program [341])
Reorder tone
Yes:
TIE line access code – 7
Other PBX extension no – de
Yes
No
No
Reorder tone
NG
Making a TIE Call from an Extension
Calls an extension.
Your extension no.
Routes to the TIE or CO line.
TIE or CO call no.