Panasonic KX-TD1232E, Installation Manual

Page: 437 / 713

4.6 CO Line Programming
ISDN Configuration
424
System Programming 4-109
Description
Assigns the configuration on ISDN port basis.
Selection • Port number: KX-TD816 – 01 through 04, ( =all ports)
KX-TD1232 – 01 through 12, ( =all ports)
• Point (point to point) / Multipoint (point to multipoint)
Default
All ports – Point
Programming
1. Enter 424.
Display: Access Mode
2. Press NEXT.
Display: Port NO?
→
3. Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #03:Point
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• Port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• If one equipment is connected to the ISDN port, select “Point,” If
multiple equipment are connected, select “Multipoint.”
• To assign all ports to one selection, press the key in step 3. In this
case, the display shows the contents programmed for a first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Feature References
Section 3, Features,
Integrated Services Digital Network (ISDN) Extension