Panasonic KX-TD1232E, Installation Manual

Page: 611 / 713

8.4 DECT PS System Programming
PS Extension Group Assignment
658
DECT Portable Station Section 8-53
Description
Assigns each PS to an extension group. Extension groups are used
for Group Call Pickup and Paging – Group
Selection
• PS registration number: KX-TD816 – 01 through 16,
KX-TD1232 – 01 through 64,
( =all PS registration numbers)
• Extension group number: 01 through 16
• Enabl (enable) / Disab (disable)
Default
All PSs – Extension group 01 – Enabl
Programming
1. Enter 658.
Display: PS EXT Group
2. Press NEXT.
Display: PS NO?
→
3. Enter the PS registration number.
You can also keep pressing NEXT until the desired PS registration
number is displayed.
Display example: PS01:EXG01:Enabl
4. Enter an extension group number.
You can also keep pressing or until the desired extension
group number is displayed.
To change the current entry, press CLEAR and enter the new
extension group number.
5. Keep pressing SELECT until the desired selection is displayed.
6. Press STORE.
7. To program another PS, press NEXT or PREV, or SELECT
and the desired PS registration number.
8. Repeat steps 4 through 7.
9. Press END.
Conditions
• There is a maximum of 16 extension groups. Each PS can only
belong to one group.
• To assign all PSs to one selection, press the key in step 3. In this
case, the display shows the contents programmed for the PS which has
the lowest PS registration number.
Feature References
Section 3, Features
Call Pickup, Group
Extension Group
Paging – Group