Panasonic KX-TD1232E, Installation Manual

Page: 497 / 713

4.9 LCR Programming
Internal ISDN Itemized Code Set
7004
System Programming 4-146.1
Description
Registers an itemized code applied to an ISDN extension.
The registered code is inserted into the “I” command position
stored in program [7X22] “LCR Carrier Modify Command.”
Selection
• Port number: KX-TD816 – 01 through 04
KX-TD1232 – 03 through 06, 09 through 12
• Itemized code: 4 digits (max.)
Default
All ports – Not Stored
Programming
1. Enter 7004.
Display: ISDN Itemized CD
2. Press NEXT.
Display: Port NO?–>
3. Enter a port number.
To enter port number 01, you can also press NEXT.
Display example: #03: Not Stored
4. Enter an itemized code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new code.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• There is a maximum of 4 itemized codes for KX-TD816, and 8
itemized codes for KX-TD1232. Each code has a maximum of 4 digits,
consisting of 0 through 9.
• For the KX-TD1232, port numbers 03 through 06 are for the Master
System and 09 through 12 are for the Slave, if available.
Feature References
Section 3, Features,
Least Cost Routing (LCR)