Panasonic KX-TD1232E, Installation Manual

Page: 111 / 713

3 Features
A
Features 3-9
• Hurry-Up Transfer does not function in the following cases;
a) The waiting queue is set “0.”
b) Hurry-Up Button is not assigned.
c) Operator 1 belongs to Station Hunting Group.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
[129] Operator Queue
Station Programming.......................................................User Manual,
Customising the Buttons – Hurry-Up Button
Feature References
Section 3, Features,
Operator
Operation References
Operator Operation – System Control
—User Manual
Forwarding a Waiting Call (Automatic Overflow / Hurry-Up Transfer)
A
utomatic Station Release
Description
After going off-hook, if an extension user fails to dial any digits
within a specified time period, the user will be disconnected from
the line after reorder tone is sent. To get a line again, the user must
go back on-hook and then off-hook.
Conditions
This function works in the following cases:
When making a call
(1)The first digit has not been dialled within 10 seconds.
(2)After a digit is dialled, the next one is not dialled within five
seconds (Intercom call only).
Programming References
Section 4, System Programming,
[207] First Digit Time
[208] Inter Digit Time
Feature References
None
Operation References
Not applicable.