Panasonic KX-TD1232E, Installation Manual

Page: 671 / 713

39
System Programming
Line Hunting Sequence
456
Description
Assigns the hunting sequence of idle lines, seizing from the
smallest to the largest line number or vice versa in a CO line group,
on a CO line group basis.
Selection
• CO line group (TRG) number: 1 through 8,
( =all CO line groups)
• Small
→
Large / Large
→
Small
Default
All CO line groups – Large
→
Small
Programming
1. Enter 456.
Display : Line Hunting
2. Press NEXT.
Display: TRK GRP NO?
→
3. Enter a CO line group number.
To enter CO line group number 1, you can also press NEXT.
Display example: TRG1:Large
→
Small
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another CO line group, press NEXT or PREV, or
SELECT and the desired CO line group number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
The default setting (Large
→
Small) may often cause a busy situation
between two PBXs, as the same line may be seized by both sides
simultaneously. In this case, we recommend changing the setting of
either PBX to
Small
→
Large
.