Panasonic KX-TD1232E, Installation Manual

Page: 711 / 713

Installation Hints – Message Card
To allow an incoming call to be directed to a UCD Message.
Setup a Hunt Group as normal, but set the Hunt Type [106] as UCD
Basic programming:
Prog Step
Contents
[134 ~ 135] Hunting Intercept An intercept destination must be set
to receive the OGM
[137 ~ 138] UCD Time Table Assignment Assign a Table to the UCD Group
[139] UCD Time Table Set the table with OGM selection
[216] O/G Message Time Default OGM 1 & 3 - 32 seconds
OGM 2 & 4 - 0 seconds
(Max record time 64 secs)
Example 1
Simple call waiting message.
Hunt Group 01 (Extn No 380) assigned as UCD group.
Program Step Contents
[106] Hunting Type Group 01 : UCD
[131] Hunt Group Assignment Group Members
[133] Hunting Overflow Ovf , 8 (max queue length)
[134 ~ 135] Hunting Intercept Intercept to own Hunt Group (380)
[137 ~ 138] UCD Time Table Assignment Assign to table 1
[139] UCD Time Table Table 1 : S1 => T1 => RT
[407 ~ 408] DIL 1:1 Assigned to Hunt Group (380)
[813] Floating Numbers Group 01 : 380
Record OGM via operator telephone.
If all the Group members are busy the call waits in the UCD queue (with the OGM).
Continued: