Panasonic KX-TD1232E, Installation Manual

Page: 361 / 713

System Programming 4-51
4.3 System Programming
VM Status DTMF Set
113
Description
Sets the DTMF signals (“inband”) that are transmitted to the Voice
Processing System (VPS), by the Panasonic telephone system,
under all the dial and connect events which the VPS can occur.
The following signals are sent to the VPS with the assigned DTMF
signals:
RBT (ringback tone) : This signal is sent when calling an
extension.
BT (busy tone) : This is sent when the called extension is
busy.
ROT (reorder tone) : This is sent when the dialled number is
invalid.
DND (DND tone) : This is sent when the other extension has
DND assigned.
Answer : This is sent when the other extension
answers the call.
Disconnect : This is sent when the other extension
hangs up.
Confirm (confirmation tone) :
This is sent when the feature number for
“Message Waiting Lamp” is valid.
FWD VM RBT (FWD to VM ringback tone) :
Not available (reserved).
FWD VM BT (FWD to VM busy tone) :
This is sent when the called extension
has set Call Forwarding to VPS.
FWD EXT RBT (FWD to extension ringback tone) :
Not available (reserved).
Selection
• RBT / BT / ROT / DND / Answer / Disconnect / Confirm /
FWD VM RBT / FWD VM BT / FWD EXT RBT
• DTMF signal number: 3 digits (max.)
Default
RBT – 1; BT – 2; ROT – 3; DND – 4; Answer – 5; Disconnect – #9
Confirm – 9; FWD VM RBT – 6; FWD VM BT – 7; FWD EXT
RBT – 8
Programming
1. Enter 113.
Display: VM Status Set
2. Press NEXT to program ringback tone status.
To program another status, keep pressing NEXT until the desired
status is displayed.
Display example: RBT :1