Panasonic KX-TD1232E, Installation Manual

Page: 466 / 713

4.7 COS Programming
Call Forwarding from Hunting Group
520
4-125.3 System Programming
Description
Enables or disables to perform the Call Forwarding from Hunting
Group on a Class of Service (COS) basis. Calls arriving at any
Hunting Groups (“All”) or just calls arriving at your Hunting Group
(“Connect”) can be forwarded to your extension.
Selection
• COS number: 1 through 8, ( =all COS)
• Disable / Connect (connected Hunting Group) /
All (all Hunting Groups)
Default
All COS – Disable
Programming
1. Enter 520.
Display: Hunt Group FWD
2. Press NEXT.
Display: COS NO?
→
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: Bkl1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
To assign all COS to one selection, press the key in step 3. In this
case, the display will show the contents programmed for COS 1.
Feature References
Section 3, Features,
Call Forwarding – from Hunting Group