Panasonic KX-TD1232E, Installation Manual

Page: 439 / 713

4.6 CO Line Programming
ISDN TEI Mode
426
System Programming 4-111
Description
Assigns the Terminal Endpoint Identifier (TEI) mode on ISDN port
basis.
Selection
• Port number: KX-TD816 – 01 through 04, ( =all ports)
KX-TD1232 – 01 through 12, ( =all ports)
• Fix 0 through 63 / Automatic
Default
All ports – Fix 0
Programming
1. Enter 426.
Display: TEI Assign
2. Press NEXT.
Display: Port NO?
→
3. Enter a port number.
To enter a Port 01, you can also press NEXT.
Display example: #01:Fix 0
4. Enter TEI.
To change the current entry, press CLEAR and the new number.
To assign “Automatic,” press CLEAR.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• Port numbers 01 through 06 are for the Master System and 07 through
12 are for the Slave, if available.
• If the “Point” is selected in program [424], assign the fixed TEI. If
“Multipoint” is selected, assign “Automatic.”
• To assign all ports to one selection, press the key in step 3. In this
case, the display shows the contents programmed for Port 01.
• After this assignment, you should reset the system so that this
assignment is effective.
Feature References
Section 3, Features,
Integrated Services Digital Network (ISDN) Extension