Panasonic KX-TD1232E, Installation Manual

Page: 643 / 713

11
Features
A call is received through a TIE line as follows.
xxxx (Extension No.)
abc-xxxx (PBX Code + Extension NO.)
dexx (Another PBX No.)
Modifies the dialed number if a removed or added
number is assigned. (Checks in programs [430–435])
DIL 1:1 or DIL 1:N
Analyses the number
of incoming call
Is the system allowed to receive TIE dial numbers?
(Checks in program [460])
Yes
No
Receiving a Call through a TIE Line
Extension no.
xxxx
Correct
Incorrect
Seize the Co
Line
Line Access
Code
Found in a TIE Line Routing
Table. (Checks in program [340])
dexx
Checks the PBX code “abc”.
(Checks in program [154])
abcxxxx
Modifies the dialed number if a
removed or added number is
assigned. (Checks in program [341])
Calls an
extension.
Checks the code
in program [100].
xxxx
Ext. no. Line access
code
Did you employ the CO line security
mode? (Checks in program [455])
Enable
Is a TIE user code received?
(Programs in program [811])
Yes
Routes to a CO or TIE line.
(ARS / Local / TRG routing)
Yes
Is the TIE-to-CO Transfer
(Checks in program [453]) or
TIE-to-TIE Transfer (Checks in
program [454]) enabled?
No
No
No
No
Calls an extension. (A
ringback tone is sent.)
Does the
corresponding
extension exist?
Is the corresponding
extension idle?
1.When the IRNA is set, the call is
routed to IRNA.
2.When the IRNA is not set, a busy
tone or reorder tone is heard.
The corresponding extension does not
exist. (Checks in program [220])
• Call Waiting
• 1.When the IRNA is set, the call is
routed to IRNA.
2.When the IRNA is not set, a busy
tone or reorder tone is heard.
Is there a hunt sequence assignment?
(Checks in program [340])
Yes
No
Yes
Yes