Panasonic KX-TD1232E Installation Manual Download Page 23

Page: 23 / 713

System Outline

1-3

1.1

System Highlights

The system can be programmed from a proprietary telephone or
from a personal computer.

Voice Mail Integration

The system supports Voice Processing Systems with in-band
DTMF signalling as well as DPT integration.

Least Cost Routing (LCR)

Automatically selects the pre-programmed least expensive route for
outgoing toll calls.

Charge Fee Reference

Allows the user to see charges and to print out the charges.

Trunk (CO Line) Answer From Any Station (TAFAS)

Ringing occurs over the external paging system; call can be
answered from any station.

Remote Station Lock Control

Allows an operator to lock an extension so that outgoing calls
cannot be made.

Budget Management

Limits the telephone usage to a pre-assigned amount.

Hotel Application

Allows to handle the front and operator services such as check-
in/check-out and wake-up call setting.

Uniform Call Distribution (UCD)

Allows an incoming calls to be distributed uniformly to a specific
group of extensions.

Summary of Contents for KX-TD1232E










































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232E

Reviews:

Related manuals for KX-TD1232E

Brands by name

Popular brands

Panasonic KX-TD1232E, Installation Manual

Search results

Summary of Contents for KX-TD1232E

Reviews:

Related manuals for KX-TD1232E

Brands by name

Popular brands