Panasonic KX-TD1232E, Installation Manual

Page: 114 / 713

B
3 Features
3-12 Features
B
usy Lamp Field
Description
The LED (Light Emitting Diode) indicators of the DSS (Direct
Station Selection) buttons, each of which corresponds to a selected
extension, tell whether the corresponding extensions are idle, busy
or in Do Not Disturb (DND) mode.
Conditions
• This function is available for DSS buttons on Consoles and for flexible
CO buttons assigned as DSS buttons on proprietary telephones.
• A DSS button indicator lights red if the corresponding extension is busy
or in DND mode.
• The DSS indicator on a proprietary telephone also informs you of
incoming calls except for the DIL 1:N and doorphone call to the
corresponding extensions. You can pick up calls by pressing the
corresponding flashing DSS buttons.
Programming References
Section 4, System Programming,
[005] Flexible CO Button Assignment
Station Programming.......................................................User Manual,
Customising the Buttons – Direct Station Selection (DSS) Button
Feature References
Section 3, Features,
Button, Direct Station
Console
Selection (DSS)
Operation References
Not applicable.
B
usy Station Signalling (BSS)
Description
When attempting to call a busy extension, Busy Station Signalling
allows you to signal the user on the phone to answer your call. The
called extension user hears a Call Waiting tone and is able to
answer the call.
Conditions
• This feature only works if the called extension has activated Call
Waiting. If it is activated, the caller will hear ringback tone.
• If the called party has been set to activate the Off-Hook Call
Announcement (OHCA) or Whisper OHCA function, the caller can
announce the call through the speaker or the handset.
• If none of three features, Call Waiting, OHCA or Whisper OHCA, is set
at the called party, the caller will hear a reorder tone.