Panasonic KX-TD1232E, Installation Manual

Page: 556 / 713

7.3 PRI System Programming
PRI Configuration
(contd.)
7-8 PRI Section
450
Programming
1. Enter 450.
Display: PRI Config.
2. Press NEXT.
Display example: 0 YYYY
3. Keep pressing SELECT until the desired combination of the
channel number and the card status is displayed.
4. Press STORE.
5. Press NEXT to assign the CRC4 mode.
Display example:CRC4:Enable
6. Keep pressing SELECT until the desired selection is dis-
played.
7. Press STORE.
8. Press END.
Conditions
• For KX-TD1232, when system connection is activated, the maximum
number of available CO lines is limited to 38. Therefore, this program
is required.
• For KX-TD1232, when you assign the number of B channels to 18, 22 or
26, ISDN Fractional Service must be provided by a telephone company.
• The available CO line numbers in program [400] are changed according
to this program, but the maximum number of B channels of CO09
through CO16 (for KX-TD816) and CO25 through CO54 (for KX-
TD1232) which are assigned in this program can be set to “Connect.”
Moreover, the CO line of the card which is set at the area of “N” cannot
be set to “Connect.”
• If you use all ports of the KX-TD286 as CO lines, the status of both the
basic and expansion area of the slave system must be “Y.” The avail-
able combinations are: “26 N–YY,” “18 Y–YY” or “0 YYYY.”
Feature References
None