![background image](http://html1.mh-extra.com/html/omron/sysmac-c500-nc113/sysmac-c500-nc113_operation-manual_742437033.webp)
3-1
Section
"
•
The leakage current must be less than 1.3 mA when two-wire type sensors are
used.
•
Since a short-circuit in the load or reversely connected power supply polarity
may damage internal circuitry, be careful when wiring them.
3-1-2 Wiring Configurations According to Origin Search Mode
Select the appropriate origin search mode (0 to 3) in accordance with the motor
driver or signal lines to be used.
This mode is used to control a stepping motor driver. In this mode, connect a
sensor to the origin signal lines (Connectors No. 10, 11, 32, 33). The response
time of the origin signal is 1 ms.
M
NC113/211
Input
power
supply
22/
34
24 VDC
Pulse
Pulse
Motor
Driver
X axis
Origin
Origin
proximity
10
11
7
This mode is used to control a servomotor driver. The origin line driver input sig-
nals lines and error counter reset output signal lines are connected, but the posi-
tioning completed signal lines are not used. The response time of the origin line
driver input is 0.1 ms.
Servo-
motor
Driver
Z-phase
output
Error
counter
reset input
Origin prox.
22/
34
M
NC113/211
Input
power
supply
24 VDC
Pulse
X axis
Origin line
driver
7
9
11
Error
counter
reset
Output po-
wer supply
4
23
5VDC
E
Origin Search Mode 0
Origin Search Mode 1
Summary of Contents for SYSMAC C500-NC113
