![background image](http://html1.mh-extra.com/html/omron/sysmac-c500-nc113/sysmac-c500-nc113_operation-manual_742437029.webp)
2-2
Section
Insert the Position Control Unit into the connector of the Backplane and tighten
the two screws (one at the top and one at the bottom) using the Phillips screw-
driver to the torque of 1.2 N
m.
Phillips screwdriver
Backplane
Position Control Unit
2-2
Components
The following illustration shows the components and nomenclature for the
C500-NC211 Position Control Unit (for two axes) and C500-NC113 Position
Control Unit (for one axis).
RUN
XCW
XCCW
YCW
YCCW
ERROR
CN1
Personal computer
connector
Connects PCU to per-
sonal computer.
CN2
I/O connector
Connects PCU to stepping
motor driver or servomotor
driver.
C500-NC211 (for two axes)
C500-NC113 (for one axis)
RUN
XCW
XCCW
ERROR
Display
Display
Mounting the Position
Control Unit
Front Panel
Summary of Contents for SYSMAC C500-NC113
