![background image](http://html1.mh-extra.com/html/omron/sysmac-c500-nc113/sysmac-c500-nc113_operation-manual_742437064.webp)
5-3
Section
),
Format
Acceleration/deceleration pattern
number (2 digits BCD)
Example: 20
+2 word
Setting Dwell Times
Dwell time addresses for common use by the X and Y axes are indirectly desig-
nated. The patterns are set in two digits, from 00 to 29. The addresses for both
axes are as follows:
X and Y axes together:
9000 to 9029
For example, if dwell time number 20 is set the dwell time registered at dwell time
data address 9020 will be executed
For details on how to set dwell times, refer to
5-6 Dwell Times
.
Format
Dwell time number (2 digits BCD)
Example: 20
+3 word
Setting Output Codes
Output codes are used to notify the Programmable Controller whenever a posi-
tioning action is executed. They are set in three digits, from 0 to 499.
Format
Output code (3 digits BCD)
Example: 123
+4 word
Setting Completion Codes
Completion codes are set in one digit, from 0 to 5.
Format
Completion code
(1 digit BCD)
Example: 5
+5 word
Summary of Contents for SYSMAC C500-NC113
