POWER REQUIREMENTS
•
Phantom power operable via MIDI cable.
Power must be between 8 and 15V DC, any
polarity. The MIDI Mongoose will accept power via a standard 7-pin MIDI cable. Consult the
owner’s manual of your processor for its phantom power support capabilities and specifications.
•
Utilizes standard 9V alkaline battery
(not included). To install, unscrew the 2 thumb-
screws to remove the right side panel. Slide the bottom cover accordingly to access the battery
clip and connect the battery. Slide the bottom cover back into position, replace the side panel and
thumbscrews.
NOTE: Be careful not to pinch the connector wires when you slide the
bottom cover back into position.
•
Power consumption of LED display
: approx. 15mA.
•
USE DC VOLTAGE POWER SUPPLY ONLY!
Failure to do so may
damage the unit and void warranty. DC Power Supply Specifications:
- 9V DC regulated or unregulated, 100mA minimum;
- 2.1mm female plug, center negative (-).
Optional factory power supply is available: Tech 21 Model
#
DC4
.
WARNINGS:
•
Attempting to repair unit is not recommended and may void warranty.
•
Missing or altered serial numbers automatically void warranty. For your own
protection, be sure serial number labels on unit and exterior box are intact.
ONE YEAR LIMITED WARRANTY
PROOF OF PURCHASE REQUIRED.
Manufacturer warrants unit to be free from defects in
materials and workmanship for one (1) year from date of purchase to the original purchaser and is
not transferable. This warranty does not include damage resulting from accident, misuse, abuse, al-
teration, or incorrect current or voltage. If unit becomes defective within warranty period, Tech 21
will elect to repair or replace it free of charge. After warranty expires, Tech 21 will repair defective
unit for a fee.
ALL REPAIRS
U.S. and Canada: Call Tech 21 for
Return Authorization Number
. Manufac-
turer will
not
accept packages without prior authorization, pre-paid freight (UPS preferred) and
proper insurance.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital de-
vice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Hand-built in the U.S.A.
using high-quality components sourced
domestically and around the globe.
Tel: 973-777-6996 / Fax: 973-777-9899
[email protected] / www.tech21nyc.com
©2017 Tech 21 USA, Inc.
