51
Connecting to the Network
Section 3-3
4.
Select the network to be connected, and then click the
OK
Button.
The Select Connected Network Dialog Box will be displayed.
5.
Select the network to be connected, and then click the
OK
Button. If an on-
line connection is made normally,
On-line
will be displayed in the status bar
at the bottom of the window.
A tab for the network to be connected will be displayed in blue as in the fol-
lowing figure.
3-3-4
Connecting to a Network
This section describes the basic concept of connecting the Network Configu-
rator to an actual network.
As shown in the following figure, the description will use an example with mul-
tiple networks in a system. In the example in the figure, the networks are
DeviceNet_1, EtherNet_1, and DeviceNet_2.
Summary of Contents for DeviceNet Safety
