Omron DeviceNet Safety, System Configuration Manual

Page: 228 / 376

194
Programming Section 6-3
6-3-6 Saving the Program
Use the following procedure to save the program.
1. Select File - Apply .
The program is saved temporarily in the Network Configurator. The data is
also saved temporarily in the same way when the user exits the Logic Ed-
itor.
2. After exiting the Logic Editor, click the OK Button in the Edit Device Param-
eters Dialog Box.
3. To save the file, select File and Save or Save As in the Main Window of the
Network Configurator.
IMPORTANT • To save the program and exit, the user must click the OK Button in the
Edit Device Parameters Dialog Box when exiting the Logic Editor.
• If the user clicks the Cancel Button, none of the parameters entered until
then, including the program, will be saved. Any programming saved tem-
porarily by applying the program (selecting
File – Apply ) will also be
deleted.