244
Basic Online Operations
Section 9-5
3.
Click the
Get from the actual network
Button.
The network number will be displayed as shown in the following figure
when it is successfully obtained.
4.
Click the
OK
Button.
After the network number has been specified, the Main Window will be dis-
played.
Note
To obtain the network number from the network, turn ON the DeviceNet net-
work power supply. If there is more than one network number on the same
network, be sure to select the correct network number.
IMPORTANT
If the network number is specified manually, it will be displayed with zeros
inserted between the fifth to eighth digits from the right when the network
number is obtained from a network. (Example: 000500000001)
IMPORTANT
If you know that the network number has been specified manually, you select
the
Manual
Option to specify it manually rather than obtaining it from the net-
work.
Checking the Network Number with the Network Configurator
You can use the following procedure to check the network number that is set
for the user system.
1,2,3...
1.
Open the network configuration file that was downloaded to the system
from the Network Configurator.
2.
Select
Network - Property
from the menu bar.
The following dialog box will be displayed.
Summary of Contents for DeviceNet Safety
