![background image](http://html1.mh-extra.com/html/omron/devicenet-safety/devicenet-safety_system-configuration-manual_743566214.webp)
180
Programming
Section 6-3
6-3-4
Programming User-defined Function Blocks
User-defined function blocks are created and used using the following steps.
• Create a user-defined function block.
• Create a program that uses the user-defined function block.
• Check operation of the program that includes the user-defined function
block.
User-defined function blocks can be imported and exported and used by other
users by following these steps.
• Export/import the user-defined function block.
• Re-use the user-defined function block.
The procedure is described in detail below.
Creating User-defined Function Blocks
Creating a New User-defined Function Block
1.
Select
Function Block – Create
from the Logic Editor Function Block
Menu.
The Logic Editor for creating a function block and the IO Property Dialog
Box will be displayed.
2.
The number of inputs and outputs and the tag name are set in the IO Prop-
erty Dialog Box. The tag name can also be set later.
The Logic Editor for creating a function block will be displayed.
Summary of Contents for DeviceNet Safety
