Omron DeviceNet Safety, System Configuration Manual

Page: 104 / 376

70
Device Parameters and Properties Section 3-7
3-7 Device Parameters and Properties
Registered device parameters can be edited on the virtual network without
restrictions. Also, for parameters saved as a network configuration file, you
can open the file later and download to a device or make modifications.
3-7-1 Editing Device Parameters
Device parameters can be edited using any of the following methods.
1.
Double-click a device icon.
2.
Select a device, and then select Device - Parameter - Edit from the menu
bar.
3.
Select a device, and then click the Edit Parameter Button on the toolbar.
4. Select a device, and then right-click the device and select Parameter - Ed-
it .
The edit window for device parameters varies depending on the device.
Refer to SECTION 5 Editing Safety Network Controller Parameters .
IMPORTANT Editing cannot be performed in the EtherNet/IP Window with the NE1A-
SCPU01-EIP or NE1A-SCPU02-EIP. Perform editing in the DeviceNet Net-
work Window.
Refer to A-7 Function Restrictions for the NE1A-SCPU0
@
-EIP for information
on functions that cannot be manipulated in the EtherNet/IP Network Window.
3-7-2 Uploading Device Parameters
Parameters of all the devices in the network that is currently displayed in the
Network Configuration Window can be uploaded from the network. Any of the
following methods enables uploading parameters from one or more selected
devices. This function is enabled only when the Network Configurator is
online.
1.
Select one or more devices, and then select Device - Parameter - Upload
from the menu bar.
2.
Select one or more devices, and then click the Upload from Device But-
ton on the toolbar.
3. Select one or more devices, and then, right-click each device and select
Parameter - Upload .
Whichever method is used, perform the operation according to the following
procedure.
This operation is supported for devices in a network that has a tab icon dis-
played in blue or green when the Network Configurator is connected to the
network (except when a USB connection is made to an NE1A-series Control-
ler).
DeviceNet network EtherNet/IP network