![background image](http://html1.mh-extra.com/html/omron/devicenet-safety/devicenet-safety_system-configuration-manual_743566335.webp)
301
Appendix A
Displaying Slave Information
Information Button on the I/O Allocation Tab Page
Information, such as I/O comments of registered slave devices, can be accessed on the I/O Allocation Tab
Page. (To set I/O comments for the I/O data of the slave devices, select
Edit I/O Comment
from the Device
Menu.)
Use the following procedure to display the slave information.
1.
Select the device for which you want to display the information.
2.
Click the
Slave Information
Button.
3.
The following window will be displayed.
If a registered device is selected while the Information Window is displayed, the slave information will be
updated to the information of the selected device.
A-2-5
Advanced Settings: Connection, Communications Cycle Time,
Slave Function Settings, etc.
This section describes connection settings, device information and check selection displays, the communica-
tions cycle time setting, message timer settings, and slave function settings.
Advanced Setup
Advanced Setup Button after Selecting a Slave on the General Tab Page (
Device
-
Parameter
-
Edit
)
Advanced settings, including device information and check selection displays, and connection settings, can be
made for remote I/O communications.
Device Information Display and Check Selections
• Device Information Tab Page
Summary of Contents for DeviceNet Safety
